SM-508 Blade moving PCB Separator

SM-508 Blade moving PCB Separator

 PCB Depaneling machine

Application Range:

Suitable fordiversified glass fibre board, FR-4 board, aluminum board, etc, especially forthe PCB with components on both faces.

Feature:

1      When PCB array is separated after soldering, its componentsand circuit might be hurt by internal stress. 508 shears PCBs by the movingblade, which could decrease internal stress occurred during the shear, internalstress keeps in range of 500-800uE, to avoid solder crack and componentfracture.

2      508 uses round blade (UP) and strip blade (Down).Whenstart to shear, place PCB on strip blade, step on foot-plate gently, the roundblade would move along the edge of strip blade, then PCB is separated totally,and the edge sheared is smooth and clean

3      Independent development, controlled by microcomputer, with counter function,

4      Round blade moving speed 0-500, adjustable

5      Round blade moving distance 0-356/500mm(blade customis available), blade height slight adjustment:0-2mm, suitable to PCB ofdifferent thickness, which solves the problem of different depth of V-slot.More, platform height is also adjustable: 17-93mm

6      The moving blade (round blade) could set the positionto stop , according to specific length of the PCB. The position to stop is tobe set manually.

7      Maximum PCB width: unlimited, maximum PCB length(shear length) 356mm/500mm, PCB thickness: 0.8 to 3.2mm

8      Height limitation of component on PCB(UP face):0-35mm (distance between component and V-slot≧3mm);

Heightlimitation of component on PCB (Down face): 0-74mm (distance between componentand V-slot ≧25mm)

9      Blades made by SKH-11 high speed steel imported,durable, can work again after polish.

10   Conveyor could be added as an option, which used tomove out PCBs conveniently after shear is done

11   Your could choose to limiting device and clamp (extracharge), for PCB of different size, to raise efficiency.

12   Light curtain and blade shell, double-security, keepoperator safe.

Technique Parameters: