- Address
- Rm B306, Build A, RunFengYuan Business Center, Block 74, Baoan District , Shenzhen , China
- Phone
- 86-13534206421 / 86-0755-27788210
- nicolas.liu@samtronik.com
ECON-SD800 Automatic Efficiency Solder Dross Separation Machine
| Categories | Other Equipment |
|---|---|
| Brand | SAMTRONIK |
| Model | ECON-SD800 |
| Power Supply | 3P 4￠ 380V /AC |
| Weight | 500KG |
| Working Power | 1.8KW |
| Update Time | Dec 22,2024 |
Detail Information
ECON-SD800 Automatic Efficiency Solder Dross Separation Machine
Our company has accumulate nearly ten years marketing experience.The engineers could deeply know the demand of clients ,enviroment
and the safety,So the most advanced technology could be integarated into the product. Tin residue is the main thing that our device facing .
After the equipment processing,the dross will be refined ,and the recycled tin could be reused.This Intelligent and efficient model could be
used under offline situation ,and no worker is needed.During the working,the only thing you need to do is putting dross into the machine
without any chemical .When the temperature reach 280 degree,the tin qualified for using would be purifed.By using our machine,a large
mount of tin could be saved and the mount of the cost will reduce.
Product
features and parameters:
Electronic
System:
|
2、Built-in time control system: time pre-setting, automaticturn on/off 3、PID function heating mold with zero touch |
Dross
loading system:
In-phase screw scraps
dross and drive it into mixing aera
which equped with dross powder container of 30kg capacity.
Mixing
System:
|
1、100kg capacity with outside heating mold
melting system. It maks tin warm up evenly and rapidly, save energy. |
|
2、400W 380V 3P mixing motor uses worm wheel
structure to avoid motor directly connect with high temperature part. |
|
3． Special designed mixing structure
makes dross evenly melted. |
|
4． Temperature couple check liquid dross
temperature and feedback acurately. |
Pure
Tin Molding System:
|
1、When pure tin reaches to |
|
2、Molding slot: |
|
3、Automatic output device: in-phase with
discharge sysyem to collect and output the pure solder. |
|
4． Inner force cooling system makes
solder bar cool down in short time. |
Fog
purify system:
Water filtering +
activated carbon filter cotton, filtering the smoke particles and peculiar
smell gas
Body
Parameters:
|
1、Streamline appearance with 3D design, green
arc glass to see the operation and easy maintenance. |
|
2、Power Supply： 3P 4￠ 380V /AC |
|
3、Size：L 4、Weight: |
|
5、Power：5.8KW
6、Working Power 1.8KW |
Review
- Loading...
Please send your message to us
- Tel
- *Title
- *Content
subscription